Alkylation of Ethylbenzene with Cyclohexylchloride: A Statistical Study

Authors

  • Manoranjan Saha Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • Prashanta Chakravarty Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • Dipti Saha Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • Md Zahangir Alam Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • Mahmud Hasan Tareque Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • Md Ashraful Alam Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • Ashequl Alam Rana Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka

DOI:

https://doi.org/10.3329/dujs.v60i1.10340

Abstract

A mathematical model was developed for the alkylation of ethylbenzene with cyclohexyl chloride in the presence of anhydrous aluminium chloride as a catalyst using the Yates Pattern experimental design. The variables chosen for the study were temperature, molar ratio of ethylbenzene to cyclohexyl choloride and amount of anhydrous aluminium chloride. The critical response was the yield of cyclohexylethylbenzene. Main effects as well as interaction effect of molar ratio of ethylbenzene to cyclohexyl chloride and amount of catalyst were statistically significant. The adequacy of the suggested model was checked.

DOI: http://dx.doi.org/10.3329/dujs.v60i1.10340  

Dhaka Univ. J. Sci. 60(1): 71-76 2012 (January)

Downloads

Download data is not yet available.
Abstract
106
PDF
123

Downloads

Published

2012-04-14

How to Cite

Saha, M., Chakravarty, P., Saha, D., Alam, M. Z., Tareque, M. H., Alam, M. A., & Rana, A. A. (2012). Alkylation of Ethylbenzene with Cyclohexylchloride: A Statistical Study. Dhaka University Journal of Science, 60(1), 71–76. https://doi.org/10.3329/dujs.v60i1.10340

Issue

Vol. 60 No. 1 (2012)

Section

Articles