Developing A Smart Control System of Electrical Appliances By Computer Interfacing

Authors

  • NK Das Assistant Professor, Department of Electrical Electronic and Engineering, Chittagong University of Engineering & Technology
  • M Ziauddin Alamgir Senior Instructors, Department of Electrical Electronic and Communication Engineering, Military Institute of Science and Technology
  • CK Das Assistant Professor, Department of Electrical Electronic and Engineering, Chittagong University of Engineering & Technology
  • MM Hasan Lecturer, Chittagong University of Engineering & Technology
  • MM Rahman Lecturer, Chittagong University of Engineering & Technology
  • MF Alam Lecturer, Chittagong University of Engineering & Technology

DOI:

https://doi.org/10.3329/mist.v3i0.8050

Keywords:

Distance control, Advance Monitoring, IP addresses based control, Client server interface, Visual basic

Abstract

The use of computer interfacing systems for controlling the device is spreading at an increasingly fast pace, with analogous wired system being substituted by computer interfaced systems alternatives in growing number of industries. As the technology progress many control system have been developed ranging from high end stuff to our common daily life. The main objective of this project is to develop a roadmap on communication and control technologies for distributed electrical equipments. Equipments located at any remote place can be monitored and controlled. The process is mainly to communicate between the two remote controlling device and setup connection between devices which are to be controlled. The main hallmark is to get access to the controlling section from any distance location in a convenient way and supervising the system accordingly. The speciality of this project is that the operator will able to control different devices at home/industry by using a single PC. An added advantage of this control system is that the operator will able to know the status of the device to be controlled from a remote place. Here, the algorithm of controlling any kind of electrical equipments is developed. The speeds of a DC motor are controlled as a test case and also monitor the voltage and current during different speed level of the motor.

KEY WORDS: Distance control; Advance Monitoring; IP addresses based control; Client server interface; Visual basic.

DOI: http://dx.doi.org/10.3329/mist.v3i0.8050

Downloads

Download data is not yet available.
Abstract
181
PDF
479

Downloads

How to Cite

Das, N., Alamgir, M. Z., Das, C., Hasan, M., Rahman, M., & Alam, M. (2011). Developing A Smart Control System of Electrical Appliances By Computer Interfacing. MIST Journal: GALAXY (DHAKA), 3. https://doi.org/10.3329/mist.v3i0.8050

Issue

Vol. 3 (2011)

Section

Articles

License

All rights reserved. No part of this publication may be reproduced, stored in retrieval system, or transmitted in any form, or by any means, electrical, photocopying, recording, or otherwise, without the prior permission of the publisher.