Utilization of Pitali (<i>Trewia nudiflora</i>) for Manufacturing Commercial Plywood in Bangladesh

Authors

  • M Hasan Shahria Forestry and Wood Technology Discipline, Khulna University, Khulna-9208
  • M Ashaduzzaman Forestry and Wood Technology Discipline, Khulna University, Khulna-9208
  • M Iftekhar Shams Forestry and Wood Technology Discipline, Khulna University, Khulna-9208
  • Arifa Sharmin Forestry and Wood Technology Discipline, Khulna University, Khulna-9208
  • M Muktarul Islam Forestry and Wood Technology Discipline, Khulna University, Khulna-9208

DOI:

https://doi.org/10.3329/bjsir.v43i4.2249

Keywords:

Plywood, Trewia nudiflora, Physical properties, Mechanical properties

Abstract

The study was conducted to find out the potentiality of Pitali (Trewia nudiflora) for manufacturing commercial plywood and evaluating its physical and mechanical properties. Two 9-ply plywood of 2.4m x 1.2m x 18mm size were manufactured using liquid urea formaldehyde adhesive. The physical and mechanical properties of T. nudiflora plywood were compared with the existing market available plywood manufactured by Simul (Bombax ceiba). It was found that density were 509.82 kg/m3 and 490.96 kg/m3, moisture content after curing were 10.67% and 17.61%, thickness swelling were 6.90% and 7.29%, linear expansion were 0.19% and 0.15%, water absorption were 50.89% and 64.79%, MOR were 29.94 N/mm2 and 27.05 N/mm2, MOE were 1613.89 N/mm2 and 1160.68 N/mm2, and tensile strength were 14.75 N/mm2 and 13.12 N/mm2 for T. nudiflora plywood and market plywood respectively. The evaluated physical and mechanical properties of T. nudiflora plywood were also compared with some relevant results and standards reported earlier.

Key Words: Plywood, Trewia nudiflora, Physical properties, Mechanical properties.

doi: 10.3329/bjsir.v43i4.2249

Bangladesh J. Sci. Ind. Res. 43(4),581-587, 2008

Downloads

Download data is not yet available.
Abstract
144
PDF
189

Downloads

How to Cite

Shahria, M. H., Ashaduzzaman, M., Shams, M. I., Sharmin, A., & Islam, M. M. (2009). Utilization of Pitali (<i>Trewia nudiflora</i>) for Manufacturing Commercial Plywood in Bangladesh. Bangladesh Journal of Scientific and Industrial Research, 43(4), 581–587. https://doi.org/10.3329/bjsir.v43i4.2249

Issue

Vol. 43 No. 4 (2008)

Section

Short Communications

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.