Characterization of jute and glass fiber reinforced polyester based hybrid composite In this research

Authors

  • MR Hassan Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • MA Gafur PP & PDC, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka
  • AA Rana Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • MR Qadir PP & PDC, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka
  • SM Masum Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • AM Sarwaruddin Chowdhury Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka
  • MM Karim Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka

DOI:

https://doi.org/10.3329/bjsir.v51i2.28088

Keywords:

Polyester, Jute and glass fiber, Tensile strength, Flexural strength, Hardness

Abstract

In this research work an attempt is made to fabricate a hybrid composite material with hessian cloth (natural fiber) and glass fiber (synthet ic fiber) in polyester matrix using hand lay-up process and testing was performed by ASTM standards. Main objective of this research work is to investigate the effects of use of natural fiber in the composite material with the synthetic fiber. Experimental results revealed that hybridization of composite with natural and synthetic fibers shows promising tensile strength, flexural strength and hardness. Among the hybrid composites one with the composition of three layers of glass fibers and two layers of hessian cloth (jute fiber) showed highest ten sile strength and flexural strength which were found 104.63 MPa and 134.65 MPa respectively. Water absorption was high in composites having higher hessian cloth content than glass fiber. Composite with high glass fiber content showed high hardness which was 39.9 HV.

Bangladesh J. Sci. Ind. Res. 51(2), 81-88, 2016

Downloads

Download data is not yet available.
Abstract
194
PDF
218

Downloads

Published

2016-06-12

How to Cite

Hassan, M., Gafur, M., Rana, A., Qadir, M., Masum, S., Chowdhury, A. S., & Karim, M. (2016). Characterization of jute and glass fiber reinforced polyester based hybrid composite In this research. Bangladesh Journal of Scientific and Industrial Research, 51(2), 81–88. https://doi.org/10.3329/bjsir.v51i2.28088

Issue

Vol. 51 No. 2 (2016)

Section

Articles

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.