Effect of waterlogging on physical and mechanical properties of Samanea saman (Jacq.) Merr. tree
DOI:
https://doi.org/10.3329/bjsir.v52i1.32080Keywords:
Samanea saman, Waterlogging, Non-waterlogging, Physical properties, Mechanical propertiesAbstract
This research intends to explore the mechanical and physical properties of waterlogged rain tree (Samanea saman). The variation of mechanical and physical wood properties grown in waterlogged and non-waterlogged area were studied. Four trees of the species were selected from two areas. Important mechanical and physical properties were examined for the wood of two types of trees Oven dry density for the wood of waterlogged tree was 420 kg/m3 whether it was 550 kg/m3 for the wood of non-waterlogged tree. The MOR of wood of waterlogged tree was 58.2 N/mm2 and wood of non-waterlogged tree produced 78.1 N/mm2. The MOE of the wood of waterlogged tree and non-waterlogged tree were 1478 and 4876 N/mm2. The physical and mechanical properties were lower for the wood of waterlogged tree. Such findings may in proper uses of the species.
Bangladesh J. Sci. Ind. Res. 52(1), 49-52, 2017
Downloads
20
32
Downloads
Published
How to Cite
Issue
Section
License
Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.
The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they dont have to license their derivative works on the same terms.