Supercritical Fluid Extraction as a Successful Technique for Pesticides Estimation

Authors

  • Samsuddin Faisal Mahmood Department of Applied Chemistry and Chemical Technology, University of Dhaka, Dhaka
  • Tamanna Sultana aDepartment of Applied Chemistry and Chemical Technology, University of Dhaka, Dhaka
  • Mohammad Arifur Rahman Toxicology Laboratory, Horticulture Research Centre, Bangladesh Agricultural Research Institute (BARI), Gazipur

DOI:

https://doi.org/10.3329/bjsir.v45i1.5183

Keywords:

Supercritical fluid extraction (SFE), Pesticides, Pressure, Temperature, Matrix, Soxhlet extraction

Abstract

Recently Supercritical fluid extraction (SFE) has been focused as successful sample preparation step for pesticide multiresidue analysis due to its numerous advantages over classical solvent extractions (mainly rapidity, selectivity, low solvent volume requirement). However, developing SFE for pesticides is linked to numerous factors like pressure, temperature inside the cell, static time, flow rate and dynamic time (or fluid volume), volume of modifier added etc. Therefore, adequate knowledge is required for a new user to optimize the extraction performance for every new class of pesticides or new matrix to be analysed. Consequently, extraction parameters need to be carefully chosen. For instance, SFE of polar pesticides is enhanced by modifiers added to the matrix or the supercritical fluid. So this article discusses detail the principal strategies for efficient extractions of pesticides from several matrices.

Key words: Supercritical fluid extraction (SFE); Pesticides; Pressure; Temperature; Matrix; Soxhlet extraction.

DOI: 10.3329/bjsir.v45i1.5183

Bangladesh J. Sci. Ind. Res. 45(1), 47-56, 2010  

Downloads

Download data is not yet available.
Abstract
146
PDF
98

Downloads

How to Cite

Mahmood, S. F., Sultana, T., & Rahman, M. A. (2010). Supercritical Fluid Extraction as a Successful Technique for Pesticides Estimation. Bangladesh Journal of Scientific and Industrial Research, 45(1), 47–56. https://doi.org/10.3329/bjsir.v45i1.5183

Issue

Vol. 45 No. 1 (2010)

Section

Articles

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.