Development of Mechanical Device for the Addition of Dyes and Auxiliaries in Textile Wet Processing

Authors

  • MM Alam Dyeing Divtion, Lethe group, Sonarpar, Dhaka, Bangladesh.
  • M MU Jubayer Dyeing Divtion, Lethe group, Sonarpar, Dhaka, Bangladesh.
  • MA Kaysar Dyeing Divtion, Lethe group, Sonarpar, Dhaka, Bangladesh.

DOI:

https://doi.org/10.3329/bjsir.v42i3.676

Abstract

In the exhaust dyeing of knit woven, jute/cotton fabrics a progressive addition process is developed and found most effective method in respect of cost and quality. It was done by an electronic device. In this paper we have developed it mechanically .It thought that it may be suitable for Bangladesh export oriented knit woven and blended fabrics dyeing units for its very low price. Bangladesh J. Sci. Ind. Res. 42(3), 357-360, 2007

Downloads

Download data is not yet available.
Abstract
67
PDF
116

Downloads

How to Cite

Alam, M., Jubayer, M. M., & Kaysar, M. (2008). Development of Mechanical Device for the Addition of Dyes and Auxiliaries in Textile Wet Processing. Bangladesh Journal of Scientific and Industrial Research, 42(3), 357–360. https://doi.org/10.3329/bjsir.v42i3.676

Issue

Vol. 42 No. 3 (2007)

Section

Short Communications

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.