Hydrophobic property of handmade jute paper treated by sizing material 'rosin'

Authors

  • HM Zakir Hossain Pilot Plant and Processing Division Bangladesh Jute Research Institute (BJRI), Manik Mia Avenue, Dhaka
  • Md Kamal Uddin Pilot Plant and Processing Division Bangladesh Jute Research Institute (BJRI), Manik Mia Avenue, Dhaka
  • Khaled Saifullah Mechanical Processing Division (BJRI), Dhaka
  • MM Rashid Textile Physics Division (BJRI), Dhaka
  • MM Mollah Textile Physics Division (BJRI), Dhaka

DOI:

https://doi.org/10.3329/diujst.v5i1.4381

Keywords:

Handmade, Jute, Paper, Hydrophobic, Sizing material

Abstract

To produce hydrophobic handmade paper internal material rosin along with external additive (MCC suspension), internal additive (wax emulsion) and reinforcement were used. Optimum result was obtained when rosin along with alum was used as internal additive during pulp preparation and MCC in the form of suspension was applied as external additive. The hydrophobicity was increased by 92.46% due to rosin-alum treatment and application of MCC suspension as external additive. It was also observed that application of wax along with rosin hampered/hindered the hydrophobicity.

Keyword: Handmade, Jute, Paper, Hydrophobic, Sizing material

DOI: 10.3329/diujst.v5i1.4381

Daffodil International University Journal of Science and Technology Vol.5(1) 2010 pp.48-52

Downloads

Download data is not yet available.
Abstract
108
PDF
308

Downloads

How to Cite

Hossain, H. Z., Uddin, M. K., Saifullah, K., Rashid, M., & Mollah, M. (2010). Hydrophobic property of handmade jute paper treated by sizing material ’rosin’. Daffodil International University Journal of Science and Technology, 5(1), 48–52. https://doi.org/10.3329/diujst.v5i1.4381

Issue

Section

Papers