Effect Of Strength On Cotton And Blended Mattress Fabric Produced By Mechanical Processing System

Authors

  • Md Abul Kalam Azad Bangladesh Jute Research Institute, Dhaka
  • Shamina Jafrin Bangladesh Jute Research Institute, Dhaka
  • Md Tahzibul Haque Khulna University of Engineering & Technology (KUET)

DOI:

https://doi.org/10.3329/diujst.v6i2.9340

Keywords:

Strength, Mattress, Jute-cotton Union, Mechanical, Warpwise, Waftwise, Bursting.

Abstract

Mattress fabric is one time used fabric. It need not require for washing. In this perspective, a project was taken to replace 100% cotton mattress fabric instead of Jute-Cotton blended mattress fabric. It is seen that Jute: Cotton blended mattress fabric posses similar properties to the 100% cotton mattress fabric. Bursting strength is an important factor for mattress fabric. From the comparison result, it is also seen that the bursting strength of 80:20/Jute: Cotton blended mattress fabric is nearer to the 100% cotton mattress fabric. On the other hand, blended mattress fabric is cheaper than 100% Cotton mattress fabric. Hence, blended mattress fabric may be the replacement of 100% cotton mattress fabric.

Keywords: Strength; Mattress; Jute-cotton Union; Mechanical; Warpwise; Waftwise; Bursting.

DOI: http://dx.doi.org/10.3329/diujst.v6i2.9340

DIUJST 2011; 6(2): 11-13

Downloads

Download data is not yet available.
Abstract
1237
PDF
845

Downloads

How to Cite

Azad, M. A. K., Jafrin, S., & Haque, M. T. (2011). Effect Of Strength On Cotton And Blended Mattress Fabric Produced By Mechanical Processing System. Daffodil International University Journal of Science and Technology, 6(2), 11–13. https://doi.org/10.3329/diujst.v6i2.9340

Issue

Section

Papers