Micro-structural and Microhardness Study of Ni-Zn Ferrite Using Si Additive
DOI:
https://doi.org/10.3329/jsr.v5i3.14467Keywords:
Ni-Zn Ferrites, Si additive, Micro-hardness, Micro-structural propertiesAbstract
Mixed Ni-Zn ferrites (x = 0.66, 0.77, 0.88, 0.99) were prepared by the double sintering ceramic method. Locally available low cost Fe2O3 with 0.5wt% of Si additive was used for this purpose to reduce the process price markedly and to improve the properties of the ferrite produced. Micro structural and micro hardness properties along with density and porosity have been investigated. Hardness increases with increase in metal contact, x of NixZn1-xFe2O4. SEM and optical micrograph shows very similar morphology of the particles with the amount of Si (0.5 wt %), must be low enough to prevent growth of large grains.
© 2013 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.
doi: http://dx.doi.org/10.3329/jsr.v5i3.14467
J. Sci. Res. 5 (3), 415-420 (2013)
Downloads
158
161
Downloads
Published
How to Cite
Issue
Section
License
© Journal of Scientific Research
Articles published in the "Journal of Scientific Research" are Open Access articles under a Creative Commons Attribution-ShareAlike 4.0 International license (CC BY-SA 4.0). This license permits use, distribution and reproduction in any medium, provided the original work is properly cited and initial publication in this journal. In addition to that, users must provide a link to the license, indicate if changes are made and distribute using the same license as original if the original content has been remixed, transformed or built upon.