Realization of Inverse Active Filters Using Single Current Differencing Buffered Amplifier
DOI:
https://doi.org/10.3329/jsr.v13i1.47766Abstract
The authors introduce a new single current differencing buffered amplifier (CDBA) based inverse filter configuration. By appropriate selection of admittances, different inverse filter circuits like inverse high-pass (IHP) circuit, inverse low-pass (ILP) circuit, inverse band-reject (IBR) circuit and inverse band-pass (IBP) circuit can be realized from the same configuration. The capacitors used here are grounded/virtually grounded for all the realizations. The performances of the proposed filters have been judged by using CMOS structure of CDBA with TSMC 0.35 µm technology as well as by using the available IC of current feedback operational amplifier (CFOA) i.e. AD844 based CDBA. The simulation results agreed well with the theoretical results. Monte-Carlo simulation has also been performed to check the robustness of the proposed configuration.
Downloads
22
38
Downloads
Published
How to Cite
Issue
Section
License
© Journal of Scientific Research
Articles published in the "Journal of Scientific Research" are Open Access articles under a Creative Commons Attribution-ShareAlike 4.0 International license (CC BY-SA 4.0). This license permits use, distribution and reproduction in any medium, provided the original work is properly cited and initial publication in this journal. In addition to that, users must provide a link to the license, indicate if changes are made and distribute using the same license as original if the original content has been remixed, transformed or built upon.