Effects of bath composition and current density on the electrodeposition of Fe-Ni alloy on copper substrate and the property of deposited alloy

Authors

  • Md. Moniruzzaman Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000
  • Md. Aminul Islam Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000

DOI:

https://doi.org/10.3329/bjsir.v47i4.8699

Keywords:

Electrodeposition, Fe-Ni alloy coating, anomalous, current density

Abstract

One simple and six complex baths are used to electrodeposit Fe-Ni alloy coating on copper substrate. All baths contain the same 1.04 Ni/Fe ratio. In addition to NiSO4.7H2O, FeSO4.7H2O, H3BO3 used in simple bath, the complex baths contain Ascorbic acid, Saccharin and Citric acid in different ratios. Electrodepositions have been carried out in the bath pH and constant current density range of 1 - 2.6 and 20 - 140 mA/cm2, respectively. Anomalous nature of Fe-Ni alloy electrodeposition is suppressed in the complex baths. Microhardness as well as corrosion resistance of coating increased with increasing %Ni content in the deposit. The morphology of the Fe-Ni films obtained from simple baths is characterized by coarse-grained, non-smooth surface with presence of microcracks onto it. Coatings from complex baths are finegrained with smooth surfaces.

Bangladesh J. Sci. Ind. Res. 47(4), 379-386, 2012

DOI: http://dx.doi.org/10.3329/bjsir.v47i4.8699

Downloads

Download data is not yet available.
Abstract
135
PDF
113

Downloads

Published

2013-03-06

How to Cite

Moniruzzaman, M., & Islam, M. A. (2013). Effects of bath composition and current density on the electrodeposition of Fe-Ni alloy on copper substrate and the property of deposited alloy. Bangladesh Journal of Scientific and Industrial Research, 47(4), 379–386. https://doi.org/10.3329/bjsir.v47i4.8699

Issue

Vol. 47 No. 4 (2012)

Section

Articles

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.