An Experimental Approach of DLC Film Deposition on Metal Substrates

Authors

  • Muhammad Athar Uddin Department of Electrical & Electronic Engineering, Bangladesh University of Engineering & Technology, Dhaka
  • Md. Shamimul Haque Choudhury Department of Electrical & Electronic Engineering, Bangladesh University of Engineering & Technology, Dhaka
  • Md. Mahmud Hasan Department of Electrical & Electronic Engineering, Bangladesh University of Engineering & Technology, Dhaka
  • Sharif M Mominuzzaman 1Department of Electrical & Electronic Engineering, Bangladesh University of Engineering & Technology, Dhaka

Keywords:

DLC Film

Abstract

In this paper an experimental approach of depositing diamond like carbon (DLC) on metal substrates has been described. By electrolysis of 10% (by mass) camphoric solution in methanol, attempts were made to deposit DLC films on Copper (Cu) and Aluminum (Al) substrates at room temperature. Solution is prepared using camphor (C10H16O), a natural source in methanol solvent. At first we applied this approach on Cu substrate and then on Al substrate. The surface morphologies of deposited films were examined by scanning electron microscopy (SEM). A comparison between Cu and Al substrates has been also presented under this approach.

Journal of Electrical Engineering
The Institution of Engineers, Bangladesh
Vol. EE 37, No. II, December, 2011

Downloads

Download data is not yet available.
Abstract
159
PDF
160

Downloads

Published

2012-11-18

How to Cite

Uddin, M. A., Choudhury, M. S. H., Hasan, M. M., & Mominuzzaman, S. M. (2012). An Experimental Approach of DLC Film Deposition on Metal Substrates. Journal of Electrical Engineering, 37(2), 35–38. Retrieved from https://banglajol.info/index.php/JEE/article/view/12697

Issue

Vol. 37 No. 2 (2011)

Section

Articles